hit-air Wearble Airbag
Home LINE UP System Manual FAQ Contact About us
hit-air manual

Where and how to fix a coiled wire.


Attaching Coiled Wire
Coiled Wire
1

 

Wind the protector tube round a frame, adjust its length and cut the excess tube.

Photo
2

 

Pass the coiled wire through the protector tube.

3

 

Temporarily fix the coiled wire in the loop setter and adjust its length.

Photo
4

 

Determine the length of the coiled wire by standing on the pegs to make the coiled wire fully stretched.

5

 

Lastly, fix the wire firmly with the loop setter, knot it tightly, cut it leaving 2cm and cap the cut end.

T
6

 

Put the seat back.

Photo
Caution

How to CW
C-holder


How to CW

Determine the length of the coiled wire by standing on the pegs to make the coiled wire fully stretched.

size01

Standing with a stretched wire.

Stand up on the pegs so as to make
the coiled wire fully stretched.

size02

Standing with a slack wire.

This may cause a delay of activation.

size03

Standing in a half crouching position even if the wire is at full stretch.

This may cause a malfunction of the airbag.


Scooter

Where to adjust and fix a coiled wire may vary depending on the size and make
of the motorcycle as shown above.


set photo
SUZUKI G400

Ducati

BMW

Honda XL200R

Honda PCX125

Honda PCX125


hit-air Mugen Denko Co., Ltd.
1-1012,Ikeba,Tempaku-ku,Nagoya,
468-0055,Japan
mugen@hit-air.com Copyright: (C) 2003 MUGENDENKO
All Rights Reserved.