hit-air Wearble Airbag
Home LINE UP System Manual FAQ Contact About us


Option

Replacement Gas Cartridge

The proper size cartridge has to be used for each model.
If not, it may cause the airbag system to malfunction or damage.

Replacement gas cartridge(50cc)
Replacement gas cartridge(50cc)

List of replacement gas cartridge size

Hit-air jacket comes with a handy tool, which is to be used to complete
the replacement of the cartridge quickly and easily by yourself.

Model : VeatMC3, VestJV, HS-5, MX-7, SKV, etc.

The cartridge will last indefinitely, but should be replaced with the first
sign of rust or surface deterioration.

Replacement gas cartridge(60cc)
Replacement gas cartridge(60cc)

List of replacement gas cartridge size

Hit-air jacket comes with a handy tool, which is to be used to complete
the replacement of the cartridge quickly and easily by yourself.

Model : MLV-C, MLV-RC, MLV-P, Motorrad-2, EU-6, RS-1, etc.

The cartridge will last indefinitely, but should be replaced with the first
sign of rust or surface deterioration.

Replacement gas cartridge(25cc)
Replacement gas cartridge(30cc)

List of replacement gas cartridge size

Hit-air jacket comes with a handy tool, which is to be used to complete
the replacement of the cartridge quickly and easily by yourself.

Model : NW, KM, FR, etc.
The cartridge will last indefinitely, but should be replaced with the first
sign of rust or surface deterioration.


Replacement gas cartridge(25cc)
Replacement gas cartridge(S-50cc)

List of replacement gas cartridge size

Hit-air jacket comes with a handy tool, which is to be used to complete
the replacement of the cartridge quickly and easily by yourself.

Model : OS
The cartridge will last indefinitely, but should be replaced with the first
sign of rust or surface deterioration.

Replacement gas cartridge(100cc)
Replacement gas cartridge(100cc)

List of replacement gas cartridge size

Hit-air jacket comes with a handy tool, which is to be used to complete
the replacement of the cartridge quickly and easily by yourself.

Model : HP type
The cartridge will last indefinitely, but should be replaced with the first
sign of rust or surface deterioration.

Buckle type Connector holder
Buckle type connector holder
To stop dangling of the coiled wire while not in use.

Key wire (ring) - 42mm diameter/15cm length
Binding wire (black) is supplied with the Hit-air
conecterguide

Buckle type Key ball set (Buckle type activation and connector)
Buckle type Key ball set(Buckle type activation and connector)
A set of a key ball and a buckle type female connector to
connect/disconnect with a buckle type coiled wire now in use.
Use as the replacement for the damaged of lost set.

Buckle type Key ball set / Y-type (Buckle type activation and connector)
Buckle type Key ball set/Y-type(Buckle type activation and connector)
For the exclusive use for a small-sized key box(Y type) for the FFE, FR and Vest KM Models.
A set of a small-sized key ball (Y type) and a buckle type female connector.
Use as the replacement for the damaged or lost set.

Buckle type of additional Coiled Wire
Buckle type of additional coiled wire
The same coiled wire as attached to the Hit-air jacket and vest.
Use for the tandem or for the second/third motorcycle.

Coiled Wire-W
Additional Coiled Wire
Race Model (RS-1) Only
To be attached to the motorcycle and connected to the airbag.
Two one-touch releases are used to connect/disconnect the coiled wire in two steps.
"Key Box on the back side" Only
INCLUDED : Rubber Bushing
Rubber bushing

Thicker Protector Tube
Thicker Protector Tube
To secure a coiled wire under the handlebars of a scooter, this Thicker Protector Tube (outside diameter 12mm) replaces the slimmer protector tube (outside diameter 6mm) to avoid jamming in the space between the handlebars and the bodywork.




Specification, appearance etc. as above may change without notice.