hit-air Logo
SYSTEM LINE UP MANUAL DATA REPORT FAQ home


<@


Safety Precautions
Operation
Air Cushion
Gas Cartridge
Removing and Replacing
Air cushion
Accessories
Key Box
When a force of approximately 25 - 30kg (55 - 65 lbs.) is applied to the "coiled wire", the "key ball" will be pulled from the "key box". Then a needle in the "key box" punctures the seal of the gas cartridge to inflate the "Hit Air" instantly. The "key ball" can be pulled out from any direction.



Caution!

1
When the red slide cover is in the 'locked' (down) position, the "key ball" cannot be released from the "key box", and the "Hit Air" can not be activated. Always ensure that the red slide cover is in the "unlocked" (up) position when riding.
2
Even if the red slide cover is in the 'locked' position, if enough force is applied, the "key box" may cause the "Hit Air" to inflate. Accidental inflation may occur if the red slide cover is moved from the "locked'" position to the "'unlocked'" position when the "coiled wire" is being pulled too forcefully.
3
Do not take the "key box" apart or remove any parts.
4
The gas cartridge must be screwed fully into the bottom of the screw hole. If the cartridge fails to "seat", consult with an authorised dealer.



back next


Replacement gas cartridge list DISTRIBUTOR CONTACT US ABOUT US Message from the inventor