Remove the seat if necessary and secure the
coiled wire to the frame (if the seat is not removable see an example below).
Cover the coiled wire by the green protector tube to avoid marring the surface
of the frame.
Secure to a frame on the right-hand side of
the motorcycle (the same side as the key box on the jacket).
While not in use, keep the coiled wire under
the seat or use a connector holder.
KAWASAKI Ninja ZX12R
If the seat is not removable, secure
the coiled wire covered by the green protector tube to an exposed
frame on the lower right side of the motorcycle.
YAMAHA XJR 1300(1200)
To secure the coiled wire when not
in use, place the free end of the coiled wire in the optional connector
holder (sold separately) or keep it under the seat.
An example of a connector holder
fixed to the shock absorber bracket.
SEROW
An example of a connector holder fixed to the
handlebars.
sV MAX
An example of a connector holder fixed to the
left-hand side of the seat.
